Embedded Files
The SS-C102 PVDF Weak Signal Amplification Module is designed for the detection of voltage frequency signals within the range of 20 MV to 100 MV, covering a frequency spectrum from 0.1 Hz to 1 kHz.
Product Description
Product Description
After the signal is input from P1, it undergoes amplification in the operational amplifier U1, then passes through amplifier U2, and is finally output at P4. This module is primarily designed for detecting voltage frequency signals within the range of 20 MV to 100 MV.
P1: Signal input terminal
P4: Signal input terminal
P3: Module power supply VCC 5.0 V ± 0.2 V
GND: Power supply ground
Features
Features
Product dimension: 56 mm × 26 mm
This module consists of two stages of amplifiers, each providing 5 to 10 times amplification.
This module belongs to the weak current signal module and is highly sensitive to external electromagnetic interference. It is recommended to minimize exposure to electromagnetic interference sources during usage.
Applications
Applications
The field of low-frequency and low-voltage signal amplification.
Page updated
Google Sites
Report abuse